I have 500g I regularly tether it's just stopped working I can turn it on but no devices find it via WiFi. I have 950gig data Inc rolled over from last month
Solved
tethering stopped
Best answer by Daz_S
Hi there
By default iDM’s preferred tethering setting uses the 5GHz spectrum and if any devices are only 2.4GHz then these devices (like a Ring doorbell) can’t connect. So for starters you could try nudging it down to 2.4GHz only and then see if any devices then start to reconnect automatically. This setting is on the phone itself, not the iD app.
The other thing to try is on one of these devices is to forget that tethering hotspot and then manually reconnect again - if this then works it might be a device caching issue and you might need do the same for the other devices
+22Hi there
By default iDM’s preferred tethering setting uses the 5GHz spectrum and if any devices are only 2.4GHz then these devices (like a Ring doorbell) can’t connect. So for starters you could try nudging it down to 2.4GHz only and then see if any devices then start to reconnect automatically. This setting is on the phone itself, not the iD app.
The other thing to try is on one of these devices is to forget that tethering hotspot and then manually reconnect again - if this then works it might be a device caching issue and you might need do the same for the other devices
+24Hey there
We hope the kind advice from
If issues continue to persist, please do let us know and we can look into that further.
Thanks,
Tyler
Did my comment help answer your question? If so, don't forget to mark the response as the Most Helpful Answer.
1 person likes this
Reply.
Rich Text Editor, editor1
Editor toolbars
Press ALT 0 for help
Not the answer you were looking for?
Create a new topic and ask a question to the iD Community.
Create a topic
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.